Atop ABLELink GW21 MAXI Series Programming Manual Download Page 52

Page: 52 / 110

SDK Programming Guide Version 1.511

ABLELink

Ethernet-Serial Server MAXI Series

Input Parameters:

None

Return Value:

None

Example:

BuzzerOn()

Remarks:

Turn the buzzer on for 40ms or run led blinking 40ms.

Please refer the

SetupProcessLed()

function.

SetupComLed()

Description:

Set LEDs on/off of COM ports.

Include:

DAPAPI.H

Usage: void

SetupComLed(ushort

port

, uchar

com_led

)

;

Input Parameters:

port:

// 0:port 1, 1:port 2

com_led:

// 0:off, 1:on

Return Value:

None

Example:

SetupComLed(0,1);

// com port1 led on

SetupComLed(1,0);

// com port2 led off

Remarks:

SetupProcessLed()

Description:

Set RUN LED to on/off.

Include:

DAPAPI.H

Usage: void

SetupProcessLed(

uchar

com_led

)

;

Input Parameters:

run_led:

// 0:off, 1:on

Return Value:

None

Example:

SetupProcessLed(1);

// set RUN led on

SetupProcessLed(0);

// set RUN led off

Remarks:

This function and BuzzerOn() function both control the same DO (maybe
RUN LED or buzzer), except that SetupProcessLed() is a state changed
function and BuzzerOn() is a trigger function.

Summary of Contents for ABLELink GW21 MAXI Series




































































































Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews:

Atop ABLELink GW21 MAXI Series, Programming Manual, Page: 52 / 110

Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews: