Atop ABLELink GW21 MAXI Series Programming Manual Download Page 37

Page: 37 / 110

SDK Programming Guide Version 1.511

ABLELink

Ethernet-Serial Server MAXI Series

DisableWRProtect

Not allow to write system date/time.

GetStatuupTime

Time interval from system startup, by ms.

GetTickTime

Time

interval

from

system startup, by tick (55ms).

GetSysTime

Time interval from system startup, by second (1000ms).

5.11 Account Overview

The controller provides some API to maintain user names and password. You can use these functions to do
some security protection.

Function

Descriptions

AddAccount

Add an account (add user name and password)

DelAccount

Delete an account (delete user)

VerifyAccount

Verify an account (verify user name and password)

5.12 Wireless LAN Command Overview

There functions are only for models with wireless LAN

：

Function

Descriptions

GetESSID

Get the Extended Service Set ID

SetESSID

Set the Extended Service Set ID

GetFrame

Get frame length used for RTS/CTS handshake control

SetFrame

Set frame length used for RTS/CTS handshake control

GetFragment

Get fragment length for unicast message transmission

SetFragment

Set fragment length for unicast message transmission

GetChannel

Get

communication channel number for BSS creation

SetChannel

Get net connection control characteristics

GetNetWorkType

Get net connection control characteristics

SetNetWorkType

Set net connection control characteristics

GetTransmitRate

Get data rate for message transmission

Summary of Contents for ABLELink GW21 MAXI Series




































































































Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews:

Atop ABLELink GW21 MAXI Series, Programming Manual, Page: 37 / 110

Search results

Summary of Contents for ABLELink GW21 MAXI Series

Reviews: