8
Description of new and updated functions
Gigaset DL500A / en / A31008-xxxx-xxxx-x-xxxx / Rel3_Saturn.fm / 16.01.2012
V
e
rsion 4.1, 21
.11.2007
Internal Hold Mode when making a call to several users
Your ISDN connection offers you two telephone lines that you can use at the same
time. For this reason you have the following two options to hold an external partic-
ipant during an external consultation call or during call swapping:
u
Hold connection externally: The call is put on hold in the telephone exchange.
Therefore your second ISDN line can be used by another party.
u
Hold connection internally: The call is put on hold in your base station. In this
case both ISDN lines are occupied. If the second ISDN line is in use by another
party, an external consultation call or accepting a waiting call is
not
possible.
To activate/deactivate the internal hold mode, select
v
¢
Ï
Settings
¢
Telephony
¢
Internal Hold Mode
(
³
= On)
By factory default, the
Internal Hold Mode
is deactivated, i.e. external calls are held
on the telephon exchange (central office of the net provider).
Configuring an internal subscriber without a send connection
This section extends the section „Configuring the system settings- Assigning send and receive
connections to internal parties - Assigning a send connection“ in the user guide for your Aton
phone.
You can configure your phone or each of the registered handsets so that you can-
not make external calls. You can only make calls to internal subscribers.
v
¢
Ï
Settings
¢
Telephony
¢
Send Connections
Select and press
§OK§
.
~
Enter the system PIN if necessary and press
§OK§
.
A list of the internal parties (base, handsets, device connected to the FAX port INT8
– where applicable) is displayed.
q
Select the internal party that should not be allowed to set up external
calls and press the display key
§OK§
.
r
Select
No outgoing calls
to block all outgoing calls from this internal
party.
§Save
Press the display key to save the changes.
Please note
If the function
Internal Hold Mode
is activated, you cannot connect the two
participants with one another (no call transfer).
Please note
If you select
No outgoing calls
, all outgoing calls, calls to the network mailbox
and sending of SMS, E-Mail or fax from this internal party is blocked.
If the internal subscriber tries to make an external call, to send an SMS and so on
the message
Not possible
is displayed.
