ATON CL303 Page 48 User Manual Download

Page: 48 / 67

Handset settings

Gigaset SL560 / Aton CL303 / SWZ PTT EN / A31008-M1710-F151-1-7619 / registr_sett.fm / 10.7.06

Using Bluetooth devices

Via Bluetooth™, your handset is capable of

wireless communication with other

devices that also use this technology.
Before you can use your Bluetooth

devices, you must first activate Bluetooth

and then register the devices to the hand-

set. You can register 1 Bluetooth headset

to the handset.
For information on how to use your Blue-

tooth devices, please see the relevant user

guides for these devices.

Activating Bluetooth mode

Bluetooth

Activation

In idle status, the

icon on the handset

shows that Bluetooth mode is activated:

Registering Bluetooth devices

The distance between the handset in Blue-

tooth mode and the activated Bluetooth

device (headset or data device) should be

no more than 10 m.

Bluetooth

Search Headset

Search Data Device

The search can take up to 30 seconds.
After the device has been found, its name

is shown in the display.

§Options

Press the display key.

Trust Device

Select and press

§OK§

Enter the PIN of the Bluetooth

device to be

registered

and

press

§OK§

The device is recorded in the list of known

devices.

Cancel/repeat current search

Cancel search:

Cancel

Press the display key.

Repeat the search, if necessary:

§Options

Select and press

§OK§

Repeat Search

Select and press

§OK§

Editing the list of known (trusted)

devices

Open list

Bluetooth

Known Devices

In the displayed list there is a correspond-

ing icon next to the relevant device name:

Viewing entries

Open list

(Select entry)

§Options

Press the display key.

View Entry

Select and press

§OK§

Device name and device

address are displayed.

Back with

§OK§

Note:

If the handset is in Bluetooth mode, then the

data cable (page 56), if connected, is cut off.

Bluetooth must be deactivated before you can

use a connected data cable.

Note:

If you register a headset, you will overwrite any

previously registered headset.

INT 1

Icon

Meaning

Bluetooth

headset

Bluetooth data device

Summary of Contents for CL303




































































Search results

Summary of Contents for CL303

Reviews:

Related manuals for CL303

Brands by name

Popular brands

ATON CL303, User Manual

Search results

Summary of Contents for CL303

Reviews:

Related manuals for CL303

Brands by name

Popular brands