Atom 430 Operator Owner'S Manual Download Page 1

DOMESTIC LAWN EDGERS

2 Stroke Engines – Model 430

MULTI INTERNATIONAL GOLD MEDALS & 

AWARD WINNING LAWN EDGERS & TILLERS

Operator / 

Owner Manual

63898MA-11

1711

• 

Safety Precautions

  

• 

Assembling   

• 

Service

• 

Operating and Edging Instructions

Important Manual – Do Not Throw Away

Manual always to be available for reference or  

instructing new operators.

Introduction: Gasoline Lawn Edger

This Atom Gasoline Powered Edger is designed to the highest 

standards to ensure you many hours of uninterrupted service. 

Pay special attention to the safety precautions. Only persons 

who understand this Manual are to operate the Edger.

To receive maximum performance and satisfaction from 

your Edger, it is important that you read and understand the 

maintenance and safety precautions before using the unit. 

Contact your Atom dealer or the Atom distributor in your 

area if you do not understand or cannot carry out any of the 

operating instructions in this Manual.

Atom’s philosophy is to continually improve all of its products. 

As a result, engineering changes and improvements are made 

from time to time. Appearances may differ between models. 

This manual covers information required to operate, maintain 

and service this Atom Lawn Edger.

AS WITH ANY POWER TOOL IMPROPER USE CAN CAUSE 

SERIOUS INJURY. 

Make sure this manual is read and carefully 

understood before starting or operating this equipment.
          

 

 

      The purpose of Safety  

 

 

 

 

      Warnings and Notes in  

this Manual is to attract your attention to possible dangers and  

deserve your careful attention and understanding. The Safety  

Warnings in this Manual and on the Edger do not, by themselves, 

eliminate any danger. The instructions or warnings they give are not 

substitutes for proper accident prevention measures.

 

 

         Failure to obey a safety warning can  

 

 

         result in injury to yourself and others.

Contents

Safety Warning Labels  ....................................... 1
Safety Precautions  ......................................... 2 - 3
Assembling the Edger  .........................................3
Parts and Controls  ............................................. 4
Fuels and Oils  .................................................. 4
Starting and Stopping Instructions  ....................... 5
Edging Instructions  ............................................ 5
Maintenance Instructions  .................................... 6
Air Filter & Carburettor Instructions  ...................... 6
Troubleshooting Tips  .......................................... 7
Lubrication of Gears  .......................................... 7
Parts List and Parts Illustration  .......................... 7-8

The information contained in this manual is also  

available at 

www.atomindustries.com

                     Advises you of information or instructions vital  

                     to the operation or maintenance of the equipment.

!

  SAFETY WARNING

!

  WARNING

! NOTE

Read operators manual

Do not expose motor 

to moisture

Wear eye protection

Keep bystanders away

15m (50 feet)

Blade cover label

SAFETY WARNING LABELS

MADE IN AUSTRALIA

ATOM Lawn Edgers have Australian and foreign Patents, Patent Pending, and Design Registrations.

FIG 1

FIG 2

Disconnect the 

mains plug if the 

cord is damaged or 

entangled

E

L E

C

T R

I C

P

R

O

D

U

C

T S

O N L Y

ACN 000 583 924

PAGE

160910

Summary of Contents for 430









Reviews: