C
ONNECTING
:
Rear of Amplifier :
1) & 2) Ampli In
3) Right channel Output
4) Left channel Output
5) Power Plug
6) Trigger input (optional)
7) Power Switch
Trigger Input: This input allows the control ON/OFF of your amplifier
simultaneously to any device with a 12V trigger outlet. In order that the system is
operating, the ON/OFF button of your AMse must remain in position OFF (position
(0)). If the switch is in the ON position (I), the amplifier will work but not the
Trigger function.
Trigger cable must be a Male to Male STEREO jack plug 3.5mm (1/8”)
FUNCTIONS
:
Front of Amplifier :
8) Power indicator led
2
A
DVISES
:
-
To optimise the performances of your amplifier, you should switch it on at least
half an hour before any listening, the time for power stages to reach their ideal
working temperature. To remain the power stages at their optimal temperatures,
keep the amplifier on between two uses.
-
We advise you to use good wires to link with the other elements (CD player,
Loudspeakers…). Don't hesitate to take advise from your dealer.
-
Your Amplifier is equipped with a temporised switch on. A relay protect
loudspeakers on output power stage from over-voltage.
C
LEANING
:
Before any cleaning, switch off your amplifier (7). Use a soft and dry rag to clean
up the appliance. Never use acetone, white-spirit, ammoniac, or any kind of product
containing abrasive agent. Never try to clean up inside the appliance.
T
ROUBLES AND
S
OLUTIONS
:
TROUBLES
PROBABLE CAUSES
- The power led (8) do not
switch on;
- The power switch (7) is on wrong
position ;
- The sector wire is badly plugged;
- There is no sound from one
speaker;
- Check all connections between the
amplifier and the speaker;
- Check all connections between the
amplifier and the input;
E.C.
MARKING
:
E.C. marking certified the conformity with low tension directive 73/23/CEE,
directive CEM 89/336/CEE and national transpositions.
3
8
1 2
3
4
5 6 7
