Installation, Operation & Maintenance Guide
Matterhorn 1000/1002
14
1-888-MY-AIR11 CAG-06-21-003 AtmosAir.com
07
MECHANICAL INSTALLATION ILLUSTRATIONS
Above: Matterhorn 1002 Ionization
unit. Here you see there are
two Ionization Tubes installed,
illustrating how the ‘Spring Tangs’
are flat against the tube.
With the power plug removed, use
a flathead screwdriver to pop the
fuse drawer towards you.
Above: Matterhorn 1000 Ionization unit. Here you will see there is one Ionization
Tube installed towards the center of the device.
(This should always be installed
with the tube closest to the center of the unit.)
The remaining unused ‘Spring
Tang’ should be CAREFULLY bent by hand to a 90° angle. Please see the closer
illustration above.
Once popped loose, pull the drawer
completely out towards you.
The ‘operating’ fuse is now exposed,
along with the spare fuse (right).
Spare Fuse
