Getting Started Guide for ATWINC3400 W-Fi using SAM D21 Xplained Pro [USER GUIDE]
Atmel-42640A-Getting-Started-Guide-for-ATWINC3400WiFi-using-SAMD21-Xplained-Pro_UserGuide_02/2016
7
7
3
Getting Started with Atmel Hardware
This chapter introduces Atmel Evaluation Kits for testing IoT applications. The SAM D21 and the ATWINC3400
are essential but the IO1 and the OLED1 extension boards are optional.
3.1
Atmel SMART SAMD21-XPRO Evaluation Kit
The Atmel SAM D21 Xplained Pro evaluation kit is ideal for evaluating and prototyping with the Atmel SAM
D21 ARM Cortex-M0+ based microcontrollers. Extension boards to the SAM D21 Xplained Pro can be
purchased individually.
SAMD21J18A microcontroller
One mechanical reset button
One mechanical user pushbutton (wake-up, bootloader entry, or general purpose)
One yellow user LED
32.768kHz crystal
USB interface, device and reduced host mode
8Mb Serial Flash
Three Xplained Pro extension headers
Embedded Debugger
–
Auto-ID for board identification in Atmel Studio 7.0
–
One yellow status LED
