1.5.1.
Auto Board Identification of Xplained Pro Kit
•
When the ATmega324PB Xplained Pro kit is connected to the PC, the Windows
®
Task bar will pop-
up a message, as displayed in the following screenshot.
Figure 1-4. ATmega324PB Xplained Pro Driver Installation
•
If the driver installation is successful, EDBG will be listed in the Device Manager, as displayed in the
following screenshot.
Figure 1-5. Successful EDBG Driver Installation
•
Open Atmel Studio.
•
Go to,
View > Available Atmel Tools
. The EDBG should be listed in the tools as EDBG and the
tool status should display as
Connected
. This indicates that the tool is communicating as expected
with the Atmel Studio.
Figure 1-6. EDBG under Available Atmel Tools
Atmel AT06621: Getting Started with Atmel ATmega324PB [APPLICATION NOTE]
Atmel-42626A-Getting-Started-with-Atmel-ATmega324PB_AT06621_Application Note-03/2016
8
