AT-UHD-HDVS-300-KIT
9
AT-UHD-HDVS-300-TX
HDMI 1
POWER
INPUT
V
V
HDMI 2
VGA
DP
HDMI - RX
USB 2
USB 1
AUDIO
VGA IN
DP IN 4
USB HUB
HDBaseT OUT
RS-232
RX TX
LAN
HDMI IN 2
HDMI IN 1
USB
USB
Panel
Description
AT-UHD-HDVS-300-TX
HDMI 1
POWER
INPUT
V
V
HDMI 2
VGA
DP
HDMI - RX
USB 2
USB 1
AUDIO
VGA IN
DP IN 4
USB HUB
HDBaseT OUT
RS-232
RX TX
LAN
HDMI IN 2
HDMI IN 1
USB
USB
1
5
7
8
9
11
12
13
14
6
10
2
3
4
Front
Rear
1 Input Indicators
Displays the currently selected input.
2 POWER
Press this button to cycle through each input.
3 Cursor Buttons
Adjusts the volume on the display. Pressing both
buttons, simultaneously, will mute the volume.
4 INPUT
Press this button to toggle the power state of the
desired display.
5 USB 1
Connect a USB-A/B cable from this port to a host
USB device.
6 HDMI IN 1 / HDMI IN 2
Connect up to two HD/UHD sources to these ports
using HDMI cables.
7 USB 2
Connect a USB-A/B cable from this port to a host
USB device.
8 AUDIO
Connect a 3.5 mm mini-stereo cable from this port
to the Line Out audio port of a computer or other line-
level analog audio source.
9 VGA IN
Connect a VGA cable from this port to the VGA port
on a computer.
10 DP IN 4
Connect a DisplayPort cable from this port to a
DisplayPort source.
11 USB HUB
Connect up to two USB devices to these ports.
These ports support both USB 2.0 and USB 1.1
devices.
12 HDBaseT OUT
Connect an Ethernet cable from this port to the
receiver unit.
13 RS-232
Connect the included 3-pin captive screw connector
to an automation control system. Refer to
for wiring information. This port provides
either RS-232 pass-through or display control.
Refer to
for more
information.
14 LAN
Connect an Ethernet cable from this port to the
network.
Transmitter