AT-OPUS-RX41
21
NOTE:
The AT-OPUS-RX41 retains the currently selected input, even after the unit is powered-off
then powered-on.
1.
Login to the Web Server and access the
.
2.
Log in as the
admin
user with the required credentials. The factory-default username and password for the
admin user are listed below:
Username:
admin
Password:
Atlona
3. Click the
Auto Switch
toggle switch to the
ON
position (if not already in the ON position). This is the default
setting.
1. Connect a source to any of the four input ports on the rear panel. The AT-OPUS-RX41 will automatically switch
to the port with the connected source. The following rules apply to auto-switching.
•
If a source is disconnected, then the AT-OPUS-RX41 will fallback to a port with an active source.
• If all sources are disconnected, then the AT-OPUS-RX41 will retain the port of the last-connected source.
Auto-switching can also be used to automatically select an input. Auto-switch is enabled by default and must be
enabled for this feature to work. When auto-switching is enabled, the AT-OPUS-RX41 will automatically switch
inputs, based on the presence of an input signal. Enable auto-switching by using one of the following methods.
Device Operation
Auto Switching
Using the Web Server
Physical Input Switching
