AT-OPUS-RX41
19
1
2
3
4
INPUT
INPUT
POWER
FW
AT-OPUS-RX41
OPUS
TM
OPTIONAL
RX TX
TX RX
INPUT
4
3
2
1
HDMI OUT
DC 5V
LAN
RX
S
TX
RS-232
IR IN
OPTICAL
HDBaseT
RS-232
IR
1
2
3
4
INPUT
INPUT
POWER
FW
AT-OPUS-RX41
OPUS
TM
OPTIONAL
RX TX
TX RX
INPUT
4
3
2
1
HDMI OUT
DC 5V
LAN
RX
S
TX
RS-232
IR IN
OPTICAL
HDBaseT
RS-232
IR
Device Operation
1. Press and release the
INPUT
button on the front panel to cycle between
INPUT 1 (HDBaseT)
,
INPUT 2
,
INPUT 3
, and
INPUT 4
HDMI inputs. The
INPUT 1
is the factory-default setting.
After the
INPUT
button is pressed, the INPUT LED indicator will advance to the next input, in sequence.
In this example,
INPUT 2
is the active input and is indicated by the
INPUT 2
LED indicator on the front panel.
2. Press the
INPUT
button again to switch to
INPUT 3
. Once INPUT 4 is selected, and the
INPUT
button is
pressed again, the unit will return to
INPUT 1
.
Manual input switching can also be performed under the
of the Web Server, by
clicking the
Input Selection
drop-down list and selecting the desired input. In addition, the
x1AVx1
command
can also be used. Refer to the AT-OPUS-RX41 Application Programming Interface document for more
information.
Switching between any of the four input ports can be performed either manually or automatically. The following
section covers both methods.
Input Switching
Manual Switching
NOTE:
The AT-OPUS-RX41 retains the currently selected input, even after the unit is powered-off
then powered-on.
INPUT 2 LED indicator
INPUT button
