4
PANEL DESCRIPTION
1. EDID switch: Four EDID setting
*Below is the mode definition chart.
Mode
Select
EDID Fuction
1
2
1
↑
↑
Copy from Display
2
↑
↓
VGA MODE
3
↓
↑
1920x1200 MODE
4
↓
↓
2560x1440 MODE
2. LINK LED: When the device detects the display and sends the signal out the Link LED will illuminate.
3. SYNC LED: When the device detects the source signal the SYNC LED will illuminate.
4. Power LED: The LED will illuminate in green when powered on and red when in standby mode.
5. Reset button: Press this button to reset your EDID after each EDID setting.
1. USB OUT: Connect a USB A type cable to the display monitor or PC/notebook for audio & USB signal bypass.
There is only 1 x USB by-pass, all the other displays USB connections should be connected directly to the
computer.
2. USB IN: Connect a mini USB cable from your PC/notebook for USB signal sending.
3. MINI-DP OUT 1 & 2: Connect the MDP cable or MDP to DP cable to your MDP/DP input display for displaying
a single source on two screens simultaneously.
4. MINI-DP IN: Connect the MDP cable or MDP to DP cable from the MDP/DP source for signal sending.
1. Front Panel
2. Rear Panel
AT-MDP14
1
2
3
LINK
SYNC
RESET
4
EDID SEL 1 2
1
2
3
4
EDID
1 2
⑤
④
③
②
①
OUT
IN
OUT 4
OUT 3
OUT 2
OUT 1
IN
USB
MINI-DP
④
③
①
②
