AT-HDVS-210H-TX-WP
22
A/V Settings page
The Web GUI
Input Selection
Click the drop-down list to select the desired input.
Auto Switch
Set the
Auto Switch
mode toggle to
ON
to enable auto-switching. When auto-switching is enabled, the switcher will
automatically switch to the opposite input if a signal loss is detected on the current input. The default setting is
ON
.
HDCP Settings
Sets the HDCP reporting mode of the specified HDMI port. Input 1 = HDMI 1; Input 2 = HDMI 2. Some devices,
such as Mac computers will transmit HDCP content if an HDCP-compliant display/sink is detected. Setting this
value to OFF, will instruct the source to send non-HDCP content (if possible) to non-HDCP display and/or sink
devices. Note that setting this value to OFF will not decrypt HDCP content.
Output
Mutes or un-mutes the audio output. Set the
Output
toggle to
OFF
to disable audio on the output. The default
setting is
ON
.
Setting
Description
Input 1
HDMI 1
Input 2
HDMI 2
Setting
Description
ON
HDCP content is always transmitted by the source
OFF
Instructs the source to send non-HDCP content, if possible
