AT-HDVS-200-RX
39
Commands
CSpara
Sets the baud rate, data bits, parity bit, and stop bits for the
RS-232 2
port on the AT-HDVS-200-RX. Use this port to
control the AT-HDVS-200-RX. Each argument must be separated by a comma; no spaces are permitted. Brackets
must be used when typing this command. Use the
sta
argument to display the current serial port settings.
Syntax
CSpara[W,X,Y,Z]
Example
CSpara[115200,8,0,1]
CSpara[sta]
Feedback
CSpara[115200,8,0,1]
CSpara [115200,8,0,1]
Parameter
Description
Range
W
Baud rate
2400, 4800, 9600, 19200, 38400, 57600, 115200
X
Data bits
7, 8
Y
Parity bit
None, Odd, Even
Z
Stop bits
1, 2
CTRST
Sets the picture contrast. Use the sta argument to display the current contrast setting.
Syntax
CTRST X
Parameter
Description
Range
X
Contrast
0 ... 100, sta
Example
CTRST 65
Feedback
CTRST 65
