Atlona AT-HDVS-200-RX Manual Download

Page: 15 / 62

AT-HDVS-200-RX

Menu System

Selects the desired output resolution. The default output resolution is 720p (1280x720). The

Output Resolution

menu consists of three pages.

1. Under the

Main Menu

, highlight the

Output Resolution

menu item using the

UP/DN

buttons on the front panel.

Press the

MENU

button.

3. The

Output Resolution

menu will be displayed.

Press the

UP/DN

buttons to highlight the desired resolution.

Press the

MENU

button to confirm the selection.

6. Scroll down and select the

Menu Back

option, under

Output Resolution 3

, then press the

MENU

button to

return to the

Main Menu

Output Resolution 1

720p30

720p50

720p59.94

720p60

1080i50

1080i59.94

1080i60

1080p23.98

1080p24

1080p25

1080p29.97

1080p30

Output Resolution

Provides custom adjustment of picture brightness, contrast, saturation, hue, sharpness, and color space.

1. Under the

Main Menu

, highlight the

Output Resolution

menu item using the

UP/DN

buttons on the front panel.

Press the

MENU

button.

3. The

Picture Adjust

menu will be displayed.

Press the

UP/

buttons to highlight the desired option.

Press the

MENU

button to confirm the selection.

The current value will be highlighted in green and surrounded by brackets and two arrowheads.

Picture Adjust

Brightness

Contrast 64

Saturation

Hue

Sharpness 32

Picture Reset

Menu Back

Picture Adjust

Summary of Contents for AT-HDVS-200-RX































































Search results

Summary of Contents for AT-HDVS-200-RX

Reviews:

Related manuals for AT-HDVS-200-RX

Brands by name

Popular brands

Atlona AT-HDVS-200-RX, Manual

Search results

Summary of Contents for AT-HDVS-200-RX

Reviews:

Related manuals for AT-HDVS-200-RX

Brands by name

Popular brands