8
Maintenance
Warranty
Do not allow the sludge accumulation in the
tank to exceed a 1
″
depth. Otherwise, the
sludge build-up could damage the heating
element(s) and pump. Depending on the
application, some businesses have to clean
out the sludge weekly, while others can go
months before cleaning out the tank. Since
you can’t see the sludge, clean out the tank
within the first week of operation and
develop an appropriate clean out schedule.
The following procedure should be followed
for sludge removal:
●
Disconnect all power to the machine
or make sure all breakers are in the
off position.
●
Remove the wash rack and filter
basket from the machine.
●
Using the drain, remove solution from
the tank. You can save the solution
for reuse.
●
Scrape out the sludge through the
filter basket opening being careful to
not hit the heating element.
●
Close the drain and install the filter
Basket and wash rack.
●
Fill tank with solution to proper level.
If spray nozzles become clogged you may
need to flush the spray tubes. Remove all
pipe caps and bottom spray nozzles and run
a maximum of 60 second wash cycle.
Follow daily and monthly maintenance
guidelines included in this manual.
Limited Warranty
This warranty covers any defects in
manufacturing on your spray wash cabinet.
This warranty lasts one (1) year from the date
of purchase. Coverage terminates if you sell or
otherwise transfer the spray wash cabinet
during the period of the warranty.
Rust, or any problem that is caused by abuse,
misuse, or an act of God is not covered in this
warranty. The manufacturer should not be
liable in either tort or contract for any loss or
damage, direct, indirect, special,
consequential, or incidental, arising out of the
use or inability to use this product. Some states
or provinces do not allow the exclusion or
limitation of incidental or consequential
damages, so the above limitations may not
apply to you.
Summary of Contents for SWC-500
Page 11: ...11...