2/2
AtlasSound.com
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
©20
10
Atlas S
ound L
.P.
All rights reserved.
Atlas S
ound is a trademark of
Atlas S
ound L
.P.
All other trademarks are the proper
ty of their respecti
ve owner
s.
All specs are subject to c
hange without notice.
ATS0
02960 R
evE 7/1
2
GSS-G & GST-G
Garden Speaker
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
To Install Head Unit on Base:
1. Remove temporary cover, if present. Retain screws.
2. Attach the purple wire from the head unit to the positive input wire
and the black to the negative.
3. Line up the 3 “feet” on the head unit with the holes in the base.
4. Push the head unit down into the holes and turn clockwise to lock the
head unit in place.
5. Put a 1" Phillips-head screw (supplied with the base) through
the locking screw access hole to secure and prevent removal by
unauthorized persons.
6. Put stick-on logo cover over access hole. (See Figure 1)
7. Select transformer tap wattage or 8
Ω
input position using a dime or
small screwdriver to adjust stepped switch. (Switch is located on the
underside of the “domed” section of the head unit near outer edge.)
Insert red weather protection “plug” into recessed switch cavity
using thumb to press the cap into place. (See Figure 2)
Garden Speaker Specifications
Frequency Response
43Hz – 20kHz (±7dB)
Sensitivity (1W / 1M)
89.5dB (Half Space Reference)
Power Handling
70 Watts RMS
Horizontal Dispersion
360°
Speaker
Coaxial 8", Polypropylene / Kevlar Cone with
Rubber Surround,
1
⁄
2
" Mylar Dome Tweeter,
1
1
⁄
2
" Voice Coil, 21oz Magnet
Transformer
8, 16, & 32 Watts, with an External Switch for
Tap Selection and for Bypassing Transformer
Dimensions
Tall Base Width
17
5
⁄
8
" (448mm)
Tall Base Length
17
5
⁄
8
" (448mm)
Tall Base Height
20
7
⁄
8
" (531mm)
Short Base Diameter
15
1
⁄
8
" (384mm)
Short Base Height
13
1
⁄
8
" (334mm)
Head Unit Weight
13.2 lbs (5.99Kg)
Short Base Weight
2.4 lbs (1.09Kg)
Tall Base Weight
6.4 lbs (2.9Kg)
Figure 1
Figure 2
Speaker
Head Unit