OWNER’S MANUAL
AtlasSound.com
1601 JACK MCKAY BLVD. • ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 • FAX (800) 765-3435
©2008 Atlas Sound LP. All rights reserved.
Atlas Sound is a trademark of Atlas Sound LP. Printed in China.
ATS003211 RevA 8/08
12
Specifications are subject to change without notice
ECS-3
OWNER’S MANUAL
6.
Light Socket Power Switch – This switch turns the XLR light socket ON / OFF.
7.
Unswitched AC Outlet – This 120VAC outlet is always live when the ECS-3 power cord
is plugged into an AC mains power source and voltage is present. If voltage
is present at
the outlets it will be displayed on the AC Mains Meter. Note: The AC mains power switch or
sequencer section does not affect the Unswitched AC Outlets. The Unswitched Outlets are
protected by the surge protection circuitry but will not be shut off by the EVS circuit.
8.
External Voltage Sequence Trigger – The ECS-3 can be activated remotely by providing DC
voltages between 5VDC and 24VDC.
Note: This function overrides the front panel System
Activation Switch.
9.
External Sequence Trigger – The ECS-3 can be activated remotely by placing a momentary
switch between the two contact points.
Note: This function is in parallel with the front panel
System Activation Switch.
10.
ECM-20 DCV trigger – The ECS-3 can handle 15A of current before the breaker opens.
If 15A is not enough current to support the power requirements, this output can be used to
activate an additional power outlet such as the ECM-20SH. This triggered 24VDC voltage
works in conjunction with Sequence 3 timing section. Contact Atlas Sound for AC outlet
options.
8
9
10