6
REFERENCES
[1].
User Manual: DC and DCC Operation of Atlas Gold Series Diesel Locomotives equipped with
ESU LokSound Select Sound-Decoders,
Version 1.20, 07 May 2014 (or later). Download from
Atlas model website:
http://www.atlasrr.com/
Choose
Support
,
DCC Support
, and then double click on the listing for this document.
[2].
LokSound Select User Manual for Diesel and Steam Decoders,
Third Edition (or later), May 2012.
You can download the ESU
LokSound Select User Manual
document from the ESU website:
http://www.esu.eu/en/start/
by first selecting
DOWNLOADS.
Then click on
Instruction Manuals
. Next, click on
Digital
Decoders.
Finally, single-click on the
Download
icon in
the box labeled
LokSound Select Users
Manual.
Appendix: Body-Removal Instructions for Atlas HO-Scale S-2 Locomotives
When reading these instructions, please refer to the exploded diagram and parts list that was packed with
your Atlas HO S-2 locomotive.
Instructions for Removing the Plastic Body Shell from an Atlas HO-scale S-2 Locomotive
1. Remove the bottom handrail (the one that is attached to the cab and frame where the crew enters
the cab). Just remove the bottom part of this handrail. Leave the top part of the handrail in place
on the cab.
2. Repeat Step #1 for the other handrail at the back of the cab.
3. The final handrail that must be removed from the cab is the straight handrail that enters the cab
from the long hood.
4. Remove the cab first. Hold the frame with one hand. Using your thumb and one finger of the
other hand, hold one side of the cab at the bottom of its front and rear walls. Pull the bottom of
the cab on this side outwards just enough to clear the tabs of the cab from the tabs on the frame.
5. Repeat step 3 for the other side of the cab. Once both sides are clear, the cab can be removed.
6. The long hood has a tab on the bottom of the front nose. Be careful that you don’t break this tab.
Hold the bottom of the frame with one hand, and lift up at the back end of the long hood using
your middle finger of the other hand.
7. Be careful that the handrails don’t break while you are doing Step #6
____________________________________________________________________________________
ESU License Agreement
Software License Agreement
1.
ESU LokSound, GmbH & Co. grants you, the owner, and the right to use the software that is included with your LokSound Select system only with the
locomotive that you purchased.
2.
Copyright: The software is owned by Electronic Solutions Ulm GmbH & Co. and is protected by German copyright laws and international treaty
provisions. Therefore, neither you nor anyone else may copy the software.
Proprietary Rights and Obligations
The structure and organization of the Software/Firmware are the valuable properties of Electronic Solutions Ulm GmbH & Co. You will not make or have made, or
permit to be made, any copies of the Hardware, Software/Firmware code, or any portions thereof. You are not to modify, adapt, translate, reverse engineer, de-
compile, disassemble or create derivative works based on the Hardware or Software/Firmware. Trademarks shall be used in accordance with accepted trademark
practice, including identification of trademark owner’s name. The LokSound Select Hardware, Software, and Firmware are covered by various US and foreign
patents and patents pending.
No Other Rights
Electronic Solutions Ulm, GmbH & Co. retains ownership of the LokSound Select Hardware design and operating Software/Firmware code. Except as stated
above, this agreement does not grant you any rights to intellectual property rights to the LokSound Select Software, Firmware or Hardware. The use of any
trademarks as herein authorized does not give you any rights of ownership in that trademark.
________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________
© 2014 All rights reserved. Information in this publication supersedes that in all previous published material. The contents and the product it describes are
subject to change without notice. LokSound is a registered trademark of Electronic Solutions Ulm (ESU) GmbH & Co. MRC is a trademark of Model Rectifier
Corporation. All other trademarks are the property of their respective holders. Atlas Model Railroad Co., Inc. makes no representations or warranties with respect
to this publication. In no event shall ESU be liable for any damages, direct or incidental, arising out of or related to the use of this publication.
Issued: 05/2014