Page 7
A s s e m b l y
P r o c e s s
Step # 7
-
Position fifth Elbow with flange end,
against fourth Elbow overlap end so large
joining flanges line up. Turn fourth elbow
counterclockwise one bolt holes and then
secure with (12) bolts, (24) washers, and (12)
locknuts.
Step # 8
-
Position sixth Elbow with flange
end
against fifth Elbow overlap end so large
join-ing flanges line up. Turn fourth elbow
coun-terclockwise one bolt holes and then
secure with (12) bolts, (24) washers, and (12)
lock-nuts.
Step #9-
Secure over lap end of last 7th
Elbow Tube
to Tube Slide Exit with (2) 5/16”
bolts with
washers. Secure two bolts into
pressed nuts
near the bottom of the Exit
making sure the
exit is level at both sides.
Install 5/16” x 1-1/2”
lag bolts with washers
through remaining
ten holes in elbow flange into plastic of the
exit section, taking care not to overtighten
lag bolts in plastic.