Atmosphere
User Manual
AtlasIED.com
TELEPHONE: (800) 876-3333
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
– 22 –
General Settings for A-XLR Page
1. The General Settings page shows the connected port, with links to pages for Gate, De-Esser, Compressor, Equalizer, and Auto-Gain Control.
(
Note:
see UI pages for Mic/Line input General Settings definitions)
2. Accessory Name – displays reference to Port ID (D2) and the editable name for this accessory.
3. Connected Port ID, includes port (“D”) and location (“2”) of the accessory on the port wiring bus.
4. Dynamics Activity Indicators for DSP; each light up if enabled and active.
5. Mic Phantom Enable
6. Fixed High Pass Filter. This is a separate EQ filter placed before the Equalizer page allowing roll-off of low end before the Gate and
Compressor, allowing all bands of the Equalizer to be used for other requirements.
7. 0dB to +60 dB of preamp gain available to fine tune input sensitivity for Mic or Line sources.
8. This “Locate” push on/ push off button will toggle the LED on the accessory to locate where it is installed. Flashing will automatically
stop after 30 minutes.
