Atlas Copco XRHS 1150 CD4 C3 WUX, Instruction Manual, Page: 36 / 106

- 36 -
STARTING / STOPPING
Safety precautions
Make sure the fuel tank is filled up when
“INTERNAL FUEL” is selected.
BATTERY SWITCH
The compressor is equipped with a battery switch.
When the compressor is not in use this switch must
always be in the “OFF” position.
It is not allowed to use this switch as an emergency
switch or for stopping the compressor. It will cause
damage in the control unit when using this switch for
stopping.
Always first shut off the control unit and wait until the
display is dark before switching the battery switch to
position “OFF”.
CONTROL PANEL
Do not disconnect power supply to
control box in any way when the control
box is switched on. This will cause
memory loss.
Do not switch off the circuit breaker
when the control box is switched on. This
will cause memory loss.
Please be aware that the (optional)
preheater unit is still “live” with the
battery switch in “OFF” position.
Reference Name
POWER OFF / ON switch
To switch the control panel on and off
START button
Pressing this button will start the compressor.
STOP button
Pressing this button will stop the compressor in a controlled way.