Atlas Copco XAHS 186 Cud PNE, Instruction Manual

Page: 52 / 70

- 52 -
AIR RECEIVER
The air receiver (1) is tested according to
official standards. Regularly have
inspections carried out in conformity with
local regulations.
SAFETY VALVE
Following checks must be carried out:
•
A check of the opening of the lifting
gear, twice a year.
This can be done by screwing the cap of
the valve anti-clockwise.
• A check of the set pressure once a year
according to the local regulations. This
check cannot be done on the compressor
and must be carried out on a proper test
bench.
Daily drain condensate.
All adjustments or repairs are to
be done by an authorized
representative of the safety valve
(2) supplier, see section Specific
safety precautions.