Atlas Copco W2815XP-ATEX, Product Instructions

Page: 3 / 32

Overview
T
WARNING
• Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
• Save all warnings and instructions for future
reference.
Safety signal words
The safety signal words Danger, Warning, Caution,
and Notice have the following meanings:
DANGER indicates a hazardous situation
which, if not avoided,
will result in death or
serious injury.
DANGER
WARNING indicates a hazardous situation
which, if not avoided,
could result in death
or serious injury.
WARNING
CAUTION, used with the safety alert sym-
bol, indicates a hazardous situation which,
if not avoided, could result in minor or
moderate injury. CAUTION
NOTICE is used to address practices not
related to personal injury. NOTICE
Warranty
Contact the Atlas Copco sales representative within
your area to claim a product. Warranty will only be
approved if the product has been installed, operated
and overhauled according to the Operating Instruc-
tions.
Please also see the delivery conditions applied by
the local Atlas Copco company.
ServAid
ServAid is a utility for providing updated product
information concerning:
- Safety instructions
- Installation, Operation and Service instructions
- Exploded views
ServAid facilitates the ordering process of spare
parts, service tools and accessories for the product
of your choice. It is continuously updated with in-
formation of new and redesigned products.
You can use ServAid to present content in a spe-
cific language, provided that translations are avail-
able, and to display information about obsolete
products. ServAid offers an advanced search func-
tionality of our entire product range.
ServAid is available on DVD and on the web:
http://servaidweb.atlascopco.com
For further information contact your Atlas Copco
sales representative or e-mail us at:
servaid.support@se.atlascopco.com
Technical data
8434124835 Ordering No
W2815 XP Model
16 l/s Air consumption
N/A in Air inlet thread
16 mm Bolt size
Twin hammer Clutch type
7400 r/min Free speed
191 mm Length
1085 Nm Max torque
N/A in Quick change chuck
10 mm Rec hose size
105 dB(A) Sound power
94 dB(A) Sound pressure
ISO15744 Sound standard
3 dB(A) Sound uncertainty
1/2 in Square drive size
300-680 Nm Torque range
ISO28927-2 Vibration standard
1.0 m/s² Vibration uncertainty
4.6 m/s² Vibration value
2.7 kg Weight
Service intervals
Service recommendations
Overhauls and preventive maintenance are recom-
mended at regular intervals. If the machine is not
working properly, it should immediately be taken
out of operation for inspection. At the overhauls, all
parts should be cleaned accurately, and defective or
worn parts should be replaced.
3
© Atlas Copco Industrial Technique AB - 9836 6832 00
Product information EN W2815XP-ATEX