Atlas Copco PowerMACS 4000, User Manual

Page: 477 / 668

Peripheral Devices
9836 3521 01 477
Value sent Meaning Corresponding PowerMACS error
20 Current max CH, current high from check
21 Current min CL, current low from check
22 Security, MD TR, torque restriction
23 Security, WI AR, angle restriction
499 Other error If any other error code is set.
8.11.5.4 Characteristic Identifications
Identification Meaning Value sent Unit
WI
Actual value angle Bolt A
Grad
MI
Actual value torque Bolt T
Nm
GI
Actual values gradient Bolt TR1
Nm/Gr
TI
Actual value time Only sent as trace data
S
MR
Redundancy Torque Bolt A 2
nd
Grad
WR
Redundancy angle Bolt T 2
nd
Nm
8.11.5.5 Parameter Identifications
Identification Meaning Value sent
W-
Lower tolerance angle Bolt A low limit
W+
Upper tolerance angle Bolt A high limit
M-
Lower tolerance torque Bolt T low limit
M+
Upper tolerance torque Bolt T high limit
G-
Lower tolerance gradient Bolt TR1 low limit
G+
Upper tolerance gradient Bolt TR1 high limit
MS
Threshold Bolt A Thresh T