Atlas Copco PFD1500RA-180, Product Instructions

Page: 39 / 60

PFD1500RA-180 EN Service
© Atlas Copco Industrial Technique AB - 9836 6024 01
39
Range gear
Drill bit/Material Drill bit/Material Drill bit/Material
<1/2" Titan/Alu <3/4" Titan/Alu <1 1/4" Titan/Alu
Cycles (Use kit, Ordering No.)* (Use kit, Ordering No.)* (Use kit, Ordering No.)*
Every 1000 drilled holes 4141 0037 90, 4141 0037
91 4141 0037 92, 4141
0037 94 4141 0037 95
Every 3000 drilled holes
Every 6000 drilled holes 4141 0037 90, 4141 0037
91 4141 0037 92, 4141
0037 94 4141 0037 95
Every 12000 drilled holes 4141 0037 90, 4141 0037
91 4141 0037 92, 4141
0037 93 4141 0037 94,
4141 0037 95
Every 24000 drilled holes
Every 48000 drilled holes
* Please order the correct kit for your specific range gear, see spare part list.
Vane motor (dry air)
Drill bit/Material Drill bit/Material Drill bit/Material
<1/2" Titan/Alu <3/4" Titan/Alu <1 1/4" Titan/Alu
Cycles (Use kit, Ordering No.) (Use kit, Ordering No.) (Use kit, Ordering No.)
Every 1000 drilled holes
Every 3000 drilled holes 4081 0457 90 4081 0457 90
Every 6000 drilled holes 4081 0457 90
Every 12000 drilled holes
Every 24000 drilled holes
Every 48000 drilled holes 4141 0168 90 4141 0168 90 4141 0168 90
Lubrication Instructions
Rust protection and cleaning
Water in the compressed air can cause rust. To prevent rust we strongly recommend to install an air dryer.
Water and particles can cause sticking of vanes and valves. This can be prevented by installing an air fil-
ter close to the product to avoid pressure drop.
Lubrication guide
Valid lubricants:
Lubricant Description
A Klübersynth PEG 46-121. Can filled with 1 KG grease,
(Ordering No. 4081 0487 90).
B Vane motor oil (Q8 Chopin S46)
All O-rings shall be greased before assembly with lubricant A or B (thin layer).