manualshive.com logo in svg

Atlas Copco HiLight H6+ DC, Instruction Manual, Page: 26 / 116

Share
Download
Atlas Copco HiLight H6+ DC Instruction Manual Download Page 26

- 26 -

3.2.5

Transportation and positioning 
of the light tower onto vehicles

As well as the ability to be towed, the light tower can
also be easily lifted and moved to difficult areas
thanks to its central lifting eye and fork lift holes in its
frame. All that is needed is a fork lift truck or a
mechanical arm.
The fork lift holes and the lifting eye can also be used
to place the light tower onto trucks for road
transportation.
If the light towers are carried on trucks or similar
vehicles:

1. Ensure that the machine is stable and secure.
2. Check that the light tower is placed perfectly

horizontally (check the levels on top of the unit).

3. To ensure stability, use the fork lift slots (1) and

lifting eye (2) to fix the light tower to the transport
vehicle. 

4. Use straps or other means of anchoring, provided

that these do not affect the machine's safe
transportation and integrity. 

5. It is recommended that the machine is covered by

a tarpaulin to protect it against bad weather
conditions if it is transported on an open truck.

1

2

00_00_HiLight H6+_EN.book  Page 26  Friday, June 4, 2021  11:52 AM

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments