Atlas Copco HiLight H6+ DC Instruction Manual Download Page 22 | Manualshive

Page: 22 / 116

Atlas Copco HiLight H6+ DC Instruction Manual Download Page 22

- 22 -

3

Installation and connection

3.1

Lifting

The lifting eye, to lift the light tower by means of a
hoist, is integrated in the bodywork and easily
accessible from the outside.
When lifting the light tower, the hoist has to be placed
in such a way that the light tower, which must be
placed level, will be lifted vertically.

To be able to lift the light tower by means of a forklift,
forklift slots are provided in the frame at the left and
right side of the unit.

3.2

Parking and towing

3.2.1

Unhooking the light tower

1. Secure the support leg/jockey wheel (1) to support

the light tower in a level position.

2. Adjust the height of the support leg/jockey wheel

using the handle (2).

Lifting acceleration and deceleration
must be kept within safe limits (max.
2 g).
Helicopter lifting is not allowed.

The operator is expected to apply all
relevant safety precautions,
including those mentioned on page 9
to page 14 of this booklet.

2

1

00_00_HiLight H6+_EN.book Page 22 Friday, June 4, 2021 11:52 AM

«
...
20
21
22
23
24
...
»

Summary of Contents for HiLight H6+ DC





















































































































Reviews:

No comments