Atlas Copco GA 160 VSD, Instruction Book

Page: 94 / 112

4. Discard the old filter element.
5. Remove the O-ring from the bowl and clean the bowl with isopropanol. Cleaning cloths of Kimtech are
recommended. Position a new O-ring on the bowl.
6. Open the sealed bag at the topcap side of the filter cartridge.
7. Take the cartridge and lower the plastic until the middle of the cartridge.
8. Position the cartridge under the filter head and push it in place.
Only touch the plactic bag. Avoid contact
of the filter cartridge with the hands .
9. Remove the plastic bag and reposition the bowl.
A small amount of paint compatible lubricant ( e.g . FOODLUBE EXTREME) may be applied
to screw threads and O-rings to facilitate the assembly.
7.4 Filter disposal
Used filters must be disposed of in an environmentally friendly and safe manner, and in line with the local
recommendations and environmental legislation.
7.5 Reference conditions
Air inlet pressure 7 bar(e)
Air inlet temperature 20˚C
Ambient temperature 20˚C
7.6 Principal data
Maximum compressed air inlet pressure 16 bar(e)
Minimum compressed air inlet pressure 1 bar(e)
Minimum compressed air inlet temperature 1˚C
Maximum compressed air inlet temperature 65˚C
Maximum compressed air inlet pressure 16 bar(e)
Minimum ambient temperature 1˚C
Maximum ambient temperature 65˚C
Maximum recommended pressure drop 0.35 bar(e)
Instruction book
92 APF192090