manualshive.com logo in svg

Atlas Copco GA 160 VSD, Instruction Book

Share
Download
Atlas Copco GA 160 VSD Instruction Book Download Page 35

“Setpoint 1”

7.0 bar

 

“Setpoint 2”

6.0 bar

“Indirect Stop Level”

0.3 bar

“Menu”

“Modify”

F1

F2

F3

The regulator will not accept new values beyond the limitations.

It is possible to check the limitations which are valid for the parameter to be modified by
selecting “Limits”.

3.15 Fan motor settings

Control panel

Function

To modify the fan motor operation mode. Consult the menu flow in section 

Control programs.

Procedure

Starting from the Main screen (see section 

Main screen menu

):

• Press the key “Menu” (F1).
• Press the arrow down key (1) until “Modify Parameters” is followed by a horizontal arrow.
• Activate the menu by pressing the tabulator key (2).
• The first item “Fan Motor” will be followed by a horizontal arrow.
• Press the tabulator key (2) to activate the menu.

Instruction book

APF192090

33

Summary of Contents for GA 160 VSD

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands