Atlas Copco GA 11+, Instruction Book

Page: 37 / 152

The controller has a built-in function to automatically restart the compressor when voltage is
restored after voltage failure. This function is deactivated in compressors leaving the factory and
can only be modified after entering a password, please consult your supplier to activate this
function.
To select a menu item, or to change the setting, see section Select or modify a setting .
3.7 Auxiliary equipment parameters menu
Function
The Aux. Equipment parameters menu provides the ability to view and modify several settings
related to the auxiliary equipment of the unit.
Swipe left to navigate to the following screens:
• Dryer (optional)
• Fan (optional)
• Phase sequence detection (optional)
• Internal or External SmartBox
Procedure
To view the Aux. Equipment parameters menu:
1. Tap the Home button
on top of the screen to go to the main screen.
2. Swipe up on the left vertical swipebar until the Aux. Equipment parameters menu is shown:
Dryer
Starting from the Aux. Equipment parameters menu, swipe left until the Dryer screen is shown.
To select a menu item, or to change the setting, see section Select or modify a setting .
Instruction book
2920 7118 31 35