Extension 700
EN
Instruction Supplement
© Atlas Copco Industrial Technique AB - 9846 0005 01
3
Instruction Supplement
Technical Data
Length: 700 mm
Front end outer diameter: 32.5 mm
Compatible Tools
This extension is compatible with the following tools:
• LSF29 S150E (8423012704)
• LSF29 S180E (8423012708)
• LSF29 S250E (8423012714)
Do not use this extension with any other tool not listed in this document.
Mounting the Extension 700
1.
Remove the short left-hand threaded extension from the front part of the tool using ad-
justable spanners (4080084880).
2.
Apply Loctite 222 to the external thread of the Extension 700.
3.
Attach the Extension 700 to the front part of the tool using adjustable spanners
(4080084880).
4.
Tighten the Extension 700 to 75 Nm torque.
