Atlantic HPWH 200 Lt, Installation And Operation Manual, Page: 8 / 39

Overview InstallaBon OperaBon Maintenance Warranty
3. Transport
The product integrates several handles to
facilitate handling to the installaBon site.
To transport the boiler to the installaBon
site, always use the lower grips and top
handles as shown.
4. Working principles
The heat pump water heater uses unheated air to heat
domesBc hot water.
The coolant in the heat pump sets up a thermodynamic
cycle which allows the energy from the unheated ambient
air or the outside air to be transferred to the water in the
cylinder.
The air is passed through the device by a fan, venBlaBng the
various components including the evaporator.
As it passes through the evaporator, the coolant evaporates
and conveys calories to the intake air.
The compressor compresses the coolant causing its
temperature to rise.
This heat is transmiTed by the condenser to the domesBc
water stored in the cylinder.
The coolant expands in the thermostaBc expansion valve
and cools down. It is then once again ready to receive heat
in the evaporator.
The colder the air, the harder it is to withdraw calories from
it. Similarly, the higher the hot water sejng, the harder it is
for the heat pump to return the calories withdrawn
Observe the recommendaJons and handling on the packaging of the water heater.
J
PosiBons accepted
L
PosiBons forbidden
Air flow
intake
Air flow
exhaust
Hot water
connecBon
Cold water
connecBon
7