For thermal solar operaBon the water heater (models with
« solar» exchanger)has to be connected to the solar staBon. In
this configuraBon, the water heater receives the signal to
operate the electric backup from the solar staBon. All other
funcBons are not acBve. This connecBon should not be used for
an automaBc mulB-‐energy operaBon.
The connecBon to the solar staBon should be done on the
contacts
B1
and
B2
of the connecBon board.
9.3. ConnecJon to a solar staJon.
Electric power supply
Solar contact 230V~
A1
A2
B1
B2
C1
C2
Overview
InstallaBon
OperaBon
Maintenance
Warranty
9.4. InstallaJon of the solar sensor
Take off the plasBc cap and the
foam plug located near the
exchanger connecBons.
Push the sensor through the
plasBc cap (the cap has dedicated
perforaBons).
Insert the sensor in the sensor
slot and make sure that it is in
correct posiBon in the boTom of
the sensor slot.
Replace the foam plug and clip
the plasBc cap.
❶
❷
❸
❹
❺
21
Summary of Contents for HPWH 200 Lt
Page 1: ......