Atlantic 412236 Fitting Instructions Manual Download Page 3

Page: 3 / 12

1. WARNINGS

READ INSTRUCTIONS BELOW CAREFULLY BEFORE INSTALLATION:

If the advice and warnings in these instructions are ignored, the manufacturer cannot assume liability for any injury or damage suffered
by people or property.
The instructions describe how to install, use and maintain the appliance correctly. Respecting these instructions ensures effective and
sustainable use of the appliance.
Do not use this appliance for any purpose other than that for which it is intended.
After unpacking, check it is in good condition. If there are any problems, contact your dealer for help.
Use of any electrical appliance implies respect for the following basic rules:
- do not touch the appliance with moist or wet parts of the body (hands, feet, etc.).
- this appliance is not designed for use by people (including children) of reduced physical, sensory or mental capacity, or those inexperienced
or ignorant, unless they have received prior instruction or supervision in the use of the appliance from someone responsible for their safety.
Children must be supervised to ensure they do not play with the appliance.
- The appliance is designed to be installed inside a building. Do not connect the appliance to the main electricity supply unless it complies
with the specifications shown on the information plate.
- before working on the appliance, turn off the electricity supply and make sure it cannot be restored accidentally.
- Provide a 2A circuit-breaker for protection upstream.
This equipment must be installed by suitably qualified persons.
The installation must comply with NF C 15-100 and with professional standards. Each product or component of the installation must also
comply with the relevant standards.

2. DESCRIPTION

2.1 General points

Dual flow control unit for private house, from T2 to T7, with a maximum of 4 washrooms. Horizontal installation in roofspace, ideal for
renovation and replacement of existing products.
Primocosy HR / HR SRI: High-performance heat exchanger.
BY-PASS function for the exchange to bring cool air in during summer nights.
Individual room airflow controls with regulators in the connection points. Automatic, built-in de-icing system. Hi-flow kitchen intake with
remote controls (SRI model) or switch.

2.2 Construction

Insulated casing in PPE and sheet steel cover with foam insulation. G4 filters on intake and extraction, fitted on metal frames.
Primocosy HR: High-performance, contraflow exchange, low-energy EC 2-speed motors.

2.3 Composition

• 4 washroom connection points, Ø80 regulated at 15 or 30 m3/h.
• 2 Ø80 plugs.
• 1 kitchen connection point Ø125 regulated.
• 1 used air discharge connection point Ø125.
• 1 fresh air intake connection Ø125.
• 1 forced intake connection point Ø125.
• 8 clamping sleeves.
• 1 siphon fitted to the product for condensate collection.
• 1 switch for hi-flow kitchen connection, BY-PASS or
1 radio remote control for SRI versions.
• 1 filter clogging indicator panel.

4 washroom connection

points, Ø80 regulated at

15 or 30 m3/h

1 used air discharge connection point Ø125

1 forced intake connection
point Ø125

1 kitchen connection point Ø125
regulated

1 connection point

for fresh air Ø125

2 Ø80 plugs

SRI version

1 radio remote control

1 clamping collar for
connecting condensate
discharge