Installation Instructions
Thank you for purchasing Atlantic Technology speaker products. These
high quality 2-way speakers solve a myriad of surround sound and
distributed audio installation problems. We work very hard to ensure
that all of our speakers consistently deliver exceptional performance
and value.
We hope you enjoy them to their fullest. Please take a moment to read
these instructions so you can get the most from your speakers.
Mounting Specifications
These speakers are intended for mounting in a ceiling, in material rang-
ing from ½ inch to 1 inch thick. They require at least 4
5
⁄
8
inches of depth
as measured from the front surface of the ceiling .The cutout opening
for the ICTS-6.1 is 7
3
⁄
8
inches in diameter (3
11
⁄
16
inches radius). These
speakers will work equally as well in a wall as in a ceiling; however note
that they require more mounting depth than is normally available in a
2x4 studded wall.
Mounting Locations
Generally, it’s best to keep the speaker at least 24 inches away from any
nearby wall boundaries (wall/corner), since placing any speaker in
close proximity to other boundary surfaces will artificially reinforce
the upper bass/lower midrange sound, adversely “coloring” the sound
that the speaker produces.
The ICTS-6.1’s 1-inch dome tweeter is mounted in a pivoting housing,
so it to can be directed precisely towards the listening area for best
sound.
Model ICTS-6.1
When painting the grille...
™
ICTS-6.1-IP
Ceiling Speakers
Specifications
Dimensions
8
9
⁄
16
” (220 mm)
Cutout Dimensions
7
3
⁄
8
” (188 mm)
Mounting Depth
(from front surface of ceiling)
4
5
⁄
8
” (118 mm)
New Construction
Bracket (optional)
IC-NC-6.1
In-ceiling Back Box
(optional)
IC-BOX-6/8
Frequency Response
59-20kHz +/- 3dB
Sensitivity
88dB 1Watt/1 Meter
Recommended Amplifier Power
10-100 Watts RMS
Impedance
6 ohms
Woofer
6 ½” Polypropylene cone
Tweeter
1” Pivoting soft dome
Net Weight
4.6 Lbs (2.1 kg)
1. Remove Scrim
2. Paint Grille
3. Reapply Scrim