Atlanta Attachment Company 1335AY, Technical Manual & Parts Lists

Page: 31 / 116

Technical Manual & Parts Lists
24
Puller Assembly
Set the puller down position as low as practical without actually touching the cloth plate.
The rollers should be centered on the needle.
Rear Conveyor Assembly
Set the conveyor so it is level, parallel to the edge of the air table, and in line with the
right puller roller.
Set the height stop to hold the conveyor 1/32" above the cloth plate.
Set the spring adjustments to make the conveyor press down with about 1-2 lbs. of
weight.
Accumulator Assembly
Set the down sensor to activate at the bottom of the stroke.
Set the set collars on the stationary rollers snug against the rollers to provide a little
friction to the rollers to help prevent the accumulated loops from unrolling and falling to
the bottom of the accumulator.
Set the Material out Eye to see reflective tape wrapped around the center of the nearest
stationary roller.
From
the
library
of:
Diamond
Needle
Corp