13
ATIM_ACW-TH-O_UG_EN_V1.8
b.
LoRaWAN network pairing configuration
Only applies to the ACW-THO / LW8 version.
On LORAWAN networks, there are two methods of pairing to allow a module to connect to the
network.
- OTAA (Over The Air Activation):
In this mode, the communication keys are assigned and transmitted by the network each time the
module is started or requested to connect. This is the mode that is set by default.
- ABP (Activation By Personalization):
In this mode, the communication keys used are those shipped from the factory in the module. Each
time the module is started, the same keys are used.
When you connect the ACW-THO / LW8 to USB, the ACW Configurator automatically detects the
factory settings of the module and displays them in the following window:
LoRaWAN pairing
mode choice
Summary of Contents for Cloud Wireless ACW TH-O Series
Page 18: ...17 ATIM_ACW TH O_UG_EN_V1 8...
