Aticio MP 1600 Operating Instructions Manual Download Page 62

Page: 62 / 296

System Settings

Restore Defaults

You can return the IEEE 802.11b (wireless LAN) settings to their defaults.
• No
• Yes

Reference

Print I/F Settings List

You can check items related to the network environment.
The configuration page shows the current network settings and network infor-
mation.

Select

[

System Settings

]

using

{U}

{T}

, and then press the

{

}

key.

Select

[

Interface Settings

]

using

{U}

{T}

, and then press the

{

}

key.

Select

[

Print I/F Settings List

]

using

{U}

{T}

, and then press the

{

}

key.

Press the

{

Start

}

key.

The configuration page is printed.

Press the

{

User Tools/Counter

}

key.

Summary of Contents for MP 1600









































































































































































































































































































Search results

Summary of Contents for MP 1600

Reviews:

Aticio MP 1600, Operating Instructions Manual, Page: 62 / 296

Search results

Summary of Contents for MP 1600

Reviews: