Scorpion X2 Pad
Part # A.5.10.1015
-Installation Instructions-
Thank you for purchasing an ATI product!
Buttpad Installation
Point the shotgun in a safe direction and place the safety in the "on" position. Next pull back the
slide, and carefully inspect the chamber to be sure the shotgun is unloaded.
www. ATIgunstocks.com
Page 1
Step #1
Cut out the buttpad template below.
Note: If your ATI buttstock already has pre-drilled
holes for buttpad installation, skip to step #7.
Step #2
Pull down the latch lever and slide the ATI buttstock away
from the buffer tube.
Figure 1
Step #3
Place the buttpad template onto the buttstock and
secure the template to the buttstock with tape.
NOTE: Make sure the paper template is aligned
perfectly with the outside profile of the
buttstock. If the template is not aligned correctly,
the buttpad will not correctly assemble to the
stock.
Figure 2
Figure 3
