Manual, Flexdeburr, RC‑660 Series
Document #9610‑50‑1017‑10
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com
40
30. Install the deburring tool to the robot or work location.
31.
Connect the air hose to the spindle supply fitting and the compliance air fitting.
32. Adjust the pivot bearing preload set screw if necessary. Supply 10 psi to the compliance air
fitting. Move the turbine motor spindle like a joystick and loosen or tighten the pivot bearing
preload set screw until a slight resistance to motion can be felt.
33.
Apply and/or unlock the spindle motor air supply.
Figure 6.17—Pivot Bearing Adjustment
Spindle Supply Fitting [31]
Compliance Air Fitting
Supply 10 PSI [31,32]
[32] Pivot Bearing Preload Screw
Move the Air Motor Spindle Like a Joystick [32]
Spindle Supply Fitting [30]
Compliance Air Fitting
Supply 10 PSI [30,31]
[31] Pivot Bearing Preload Screw
Move the Air Motor Spindle Like a Joystick [31]