ATI
Model F12/D Gas Transmitter
Part 3
– Electrical Connections
19
O&M Manual (Rev-H)
3.5
Remote Sensor Wiring
The remote sensor option permits the sensor to be mounted up to 100’ from the transmitter. Remote
interconnect cable sold separately. The interconnections are shown below.
Notes:
The shield must be connected only at one end. Preferably at the Transmitter end
Use shielded 4 conductor (2 twisted pairs) cable
Loop Powered model shown. Interconnections for AC and VDC powered models are similar to Loop
powered model.
Figure 16
–Remote Sensor wiring
