Manual, FT Sensor, Ethernet Axia
Document #9610-05-Ethernet Axia-05
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
• Email:
24
5.
Configuring the Sensor with the Ethernet Axia Web Pages
The Ethernet Axia F/T sensor web pages provide full configuration options for the sensor. There are several pages
that can be selected by the menu bar toward the top of the webpage.
The web pages use simple HTML and browser scripting, and the pages do not require any plug-ins. If browser
scripting is disabled, some non-critical user interface features are not available. The demo program is written in
Java and requires Java to be installed on the computer.
The system status is displayed on all pages near the top of the page. This is the system status at the time the page
was loaded. To display the current system status the page must be reloaded. Possible system status conditions are
listed in
.
Figure 5.1—Menu Bar
5.1 Welcome Page (index.htm)
By entering the sensor IP address into the browser address field, the Ethernet F/T Welcome page appears.
The Welcome page gives a quick overview of the Ethernet Axia’s main functions. The bottom of the page
lists the calibration used by this configuration.
Figure 5.2—Welcome Page