ATI Technologies 9150-CRT Product Manual Download Page 27

Page: 27 / 31

Manual, Compliant Reciprocating Tool, CRT Series

Document #9610-50-1028-04

Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 USA • Tel: +1.919.772.0115 • Fax: +1.919.772.8259 • www.ati‑ia.com

9. Drawings

9.1 CRT-12-5 Drawing

3rd ANGLE PROJECTION

50.8

11.1

65.9

51.1 FLAT

55.3

127.6

RETRACTED

118.7

132.6

EXTENDED

NOTE 8

105.5

CENTER OF

ARTICULATION

NOTE 3

SUPPLY AIR

3/8" (10mm) TUBING

SEE NOTES

20°

71.2

109.2

63.8

139.7

COMPLIANCE AIR 5/32" (4mm) TUBING NOTE 9

OPTIONAL BENCH MOUNT ADAPTER 9005-50-6091

19.1

59.1

40.6

88.9

31.8

4X M6x1.0

CUSTOMER INTERFACE

6.06 6.04

5.5

(

5mm DOWEL SF)

CUSTOMER INTERFACE

NOTE 2

5mm CHUCK 18 FOR 5mm FILE SHANK

(4) FILES INCLUDED

114.3

9.5

19.1

4X M6 SHCS FROM FAR SIDE CUSTOMER INTERFACE

6.06 6.04

THRU

(Ø6mm DOWEL SF)

CUSTOMER INTERFACE

38.1

DETAIL A SCALE 4 : 5

SLOT PARALLEL TO FILE BOTH AXES UNLOCKED

SLOT PERPENDICULAR TO FILE

SINGLE AXIS LOCKOUT

360

COMPLIANCE

AS SHOWN

NOTES:

AXIAL AIR SUPPLY, 3/8" (10mm) PUSH TO CONNECT

OPTIONAL DOVETAIL ATTACHMENT FOR AXIAL MOUNTING.

QUARTER TURN SINGLE AXIS LOCK OUT. TURN 90

TO ENGAGE OR DISENGAGE.

AIR FILE STROKES PER MINUTE: 12000, NO LOAD.

FILER AIR CONSUMPTION: 6 CFM, AT LOAD.

FILER AIR QUALITY: 90 PSI, FILTERED 30 MICRON OR BETTER,

LUBRICATION

REQUIRED, 1-2 DROPS/MIN.

APPROXIMATE WEIGHT 6.8 LBS (3.08 kg).

COMPLIANCE TRAVEL AT COLLET = MAX

1.8

(APPROXIMATELY .32" 8mm).

COMPLIANCE AIR SUPPLY PRESSURE 15-60PSI (1-4.1 BAR).

REV.

DESCRIPTION

INITIATOR

DATE

ECO 18425; Updated Note 7.

MLS

11/2/2019

2:5

REVISION

NOTES: UNLESS OTHERWISE SPECIFIED.

DO NOT SCALE DRAWING. ALL DIMENSIONS ARE IN MILLIMETERS.

DRAWN BY:

CHECKED BY:

D. Bohle 4/17/2018

BK 3/12/2018

TITLE

SCALE

SIZE

DRAWING NUMBER

PROJECT #

SHEET OF

9630-50-CRT-12-5

170926-3

PROPERTY OF ATI INDUSTRIAL AUTOMATION, INC. NOT TO BE REPRODUCE

D IN ANY

MANNER EXCEPT ON ORDER OR WITH PRIOR WRITTEN AUTHORIZATION OF A

TI.

1031 Goodworth Drive, Apex, NC 27539, USA Tel: +1.919.772.0115 Email: [email protected] Fax: +1.919.772.8259 www.ati-ia.com ISO 9001 Registered Company

Compliant Reciprocating Tool Customer Drawing, 12k Strokes per Minute, 5mm Stroke

Summary of Contents for 9150-CRT
































Search results

Summary of Contents for 9150-CRT

Reviews:

ATI Technologies 9150-CRT, Product Manual, Page: 27 / 31

Search results

Summary of Contents for 9150-CRT

Reviews: