Manual, F/T Sensor, Serial Axia
Document #9610-05-Serial Axia-05
Pinnacle Park • 1031 Goodworth Drive • Apex, NC 27539 • Tel:+1 919.772.0115 • Fax:+1 919.772.8259 •
53
5.9 Write “set” Commands
A secondary “set” command allows the user to write or edit the stored parameter in a certain field in
. All write commands are temporary until a “saveall” command is issued. When a “saveall” command is
given, the parameter is stored in NVM.
5.9.1 Message Command: “set msg”
The user can change the unprompted error messages that are reported, where:
•
[1] prints unprompted messages.
•
[0] does not print unprompted messages.
“set msg” read and write command format, for example:
user:
set msg
response:
Field Value
----- -----
msg 1
user:
set msg 0
response:
msg was 1 now 0
5.9.2 RDT Sample Rate Command: “set rdtRate”
The user can set the RDT sampling rate by entering a value in the range of 1 to the ADC rate value.
“set rdtrate” sample rate read and write command format, for example:
user:
set rdtRate
response:
Field Value
----- -----
rdtRate 976
user:
set rdtRate 800
response:
rdtRate was 976 now 800
5.9.3 ADC Sample Rate Command: “set adcRate”
The user can set the ADC sampling rate with a value that is listed in
“set adcRate” read and write command format, for example:
user:
set adcrate
response:
Field Value
----- -----
adcRate 976
user:
set adcrate 7812
response:
adcRate was 976 now 7812
