Athena GET SL1, User Manual, Page: 40 / 92

40
SL1 DATA LOGGER User Manual Rev. AD
sales.get@athena.eu www.getdata.it
ENGLISH
12.6.5 CALIBRATING A SUSPENSION CHANNEL ON THE
CHANNEL MONITOR LIST
•
If the data channel you want to calibrate is a suspension sensor, a zero position must be set:
1) Add the channel to the Channel Monitor list (see
chapter 12.6.1
)
2) Set the type of channel as suspension and select the length of the sensor stroke (see
6.4
)
3) Make sure that the suspension is in the correct zero position
4) View the channel in real time (see
chapter 12.6.2
)
5) Follow the instructions below to set the zero position:
•
Press the Set 0 button to set the zero position, the value of the channel in mm will become
zero.
•
Send the new setup to the SL1 Data Logger, pressing Set. Conf > in the actions column.
ATTENTION:
THE SET 0 FUNCTION IS ONLY AVAILABLE FOR SUSPENSION TYPE CHANNELS