manualshive.com logo in svg

Athena GET SL1, User Manual

Share
Download
Athena GET SL1 User Manual Download Page 12

12

SL1 DATA LOGGER User Manual Rev. AD

[email protected]

www.getdata.it

ENGLISH

7   

BEFORE STARTING...

7.1   

INSTALLING THE SOFTWARE   

  

(L WinTAX Junior version)

The SL1 Data Logger requires LynXLog and WinTAX software.

Follow these instructions:

The SL1 kit includes one Get USB flash drive that contains a file called StartHere, double click 

the file and follow the instructions that appear on the screen.

If you want to install the software manually, follow these instructions:

Accept the terms of the license and then press Next>

Proceed as follows to install the LynXLog software:

• 

Double click the software installer icon:

LynXLog_GET_Install_<

Version

>.exe

LynXLog is available for Microsoft Windows©. The officially supported versions are:

Windows© 7 (32 - 64 bit), Windows© 8 (32 - 64 bit), Windows© 10 (32 - 64 bit).

ATTENTION: Internet Explorer 11 is also required, make sure it is installed.

Summary of Contents for GET SL1





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands