Athena 850-BL EVO, Translation Of Original Instructions

Page: 161 / 183

PAGE
161 ALMAC s.r.l.
•
Ensure that the machine is unable to operate and that it cannot be used,
by breaking some of its vital components and take it to a place where you
are certain that it cannot be accessed by anyone.
•
Use appropriate lifting devices
•
Disassemble the machine into small, easily transportable units.
•
Separate non-polluting materials from polluting ones when disposing of
the machine (insulating materials, plastic, rubber, etc.)
•
Never burn the machine or parts of it because the combustion products of
plastic materials and paints could develop harmful, polluting gases.
7.3 Battery disposal
Battery recycling is mandatory (European Directive 2006/66/EC) and
recommended.
•
Cells and batteries, even if fully discharged, may still contain a
considerable amount of energy. It is therefore necessary to always
protect the terminals to prevent short circuits.
•
Dispose of the batteries in compliance with local laws and regulations
(contact your nearest dealer).
•
Keep the material to be disposed of as indicated in the specific Section of
the Safety Data Sheet attached.
•
DO NOT throw into sewers, on the ground or in water courses.