Athena 1090 EVO, Translation Of Original Instructions, Page: 70 / 182

70
3.6 Blackout safety devices
3.6.1 230V external power source
On the work platform there is a power socket to supply the power tools required
during work. For safety reasons, a device is installed so as to cut-out the
electricity supply in case of over-voltage and "differential circuit breaker"
dispersions (1).
To access the device, it is necessary to unscrew the dedicated knobs on the
cover itself, removing the transparent protection panel (2) and open the
electrical box cover. When finished, replace the guard that was previously
removed and thoroughly tighten the knobs.
The power outlet on the work platform is also controlled by a switch (4) that
allows the operator to disconnect its power supply.